Tolleranze / Tolerances
| DC | h10 |
| APMX | 0/+2 |
| OAL | 0/+2 |
| DCON | h6 |
Single Flute Endmill (Straight)
Developed to offer maximum cutting neutrality and eliminate any lifting or crushing forces on the workpiece, this single-flute end mill is distinguished by its straight (axial) flute geometry. With no helix angle, the tool discharges stresses purely radially during machining: this dynamic stability makes it the best choice for cutting plastic films, thin sheets, and flexible materials that would tend to lift or vibrate under the action of a traditional helix.
Recommended for CNC and router, machining of materials such as PMMA (Plexiglas), PVC, polycarbonate (PC), ABS, NYLON, and polyethylene (PE).
The end geometry allows complex drilling, ramp milling, pocketing from solid, and subsequent perimeter trimming cycles to be performed in a single setup, optimising cycle times.
Available in a wide range of sizes.
Code: 110TD
Code: 110TD
Suitable for
O
Plexiglas PMMA
O
Thermoplastics
DC
OAL / L1
APMX / L2
| Item code | DC | OAL / L1 | DCON / D2 | APMX / L2 |
|---|---|---|---|---|
| 110TD.015030640 | 1.50 | 40.00 | 3.00 | 6.00 |
| 110TD.020030640 | 2.00 | 40.00 | 3.00 | 6.00 |
| 110TD.020061060 | 2.00 | 60.00 | 6.00 | 10.00 |
| 110TD.030031240 | 3.00 | 40.00 | 3.00 | 12.00 |
| 110TD.030061560 | 3.00 | 60.00 | 6.00 | 15.00 |
| 110TD.040061560 | 4.00 | 60.00 | 6.00 | 15.00 |
| 110TD.040062075 | 4.00 | 75.00 | 6.00 | 20.00 |
| 110TD.050061660 | 5.00 | 60.00 | 6.00 | 16.00 |
| 110TD.060062060 | 6.00 | 60.00 | 6.00 | 20.00 |
| 110TD.060063060 | 6.00 | 60.00 | 6.00 | 30.00 |
| 110TD.060063575 | 6.00 | 75.00 | 6.00 | 35.00 |
| 110TD.080082263 | 8.00 | 63.00 | 8.00 | 22.00 |
| 110TD.0800840100 | 8.00 | 100.00 | 8.00 | 40.00 |
| 110TD.100102572 | 10.00 | 72.00 | 10.00 | 25.00 |
| 110TD.1001055100 | 10.00 | 100.00 | 10.00 | 55.00 |
| 110TD.120123083 | 12.00 | 83.00 | 12.00 | 30.00 |