Tolleranze / Tolerances
| DC | h10 |
| APMX | 0/+2 |
| OAL | 0/+2 |
| DCON | h6 |
2 Flutes Endmill (Right Helix)
Developed to boost productivity and deliver an excellent surface finish on a wide range of plastics and technopolymers.
This Z=2 right helix cutter perfectly balances smooth material removal with rapid chip evacuation. The double-helix design distributes the workload symmetrically, drastically reducing vibrations while enabling higher feed rates.
Recommended for CNC and router machining of PMMA (Plexiglas), PVC, polycarbonate (PC), ABS, NYLON, and polyethylene (PE).
Its advanced front geometry allow drilling, ramping, pocketing from solid, and perimeter trimming in a single setup, significantly cutting cycle times.
Available in a wide range of sizes.
Code: 102
Code: 102
Suitable for
O
Thermosetting Plastics POM PEEK
DC
OAL / L1
APMX / L2
| Item code | DC | OAL / L1 | DCON / D2 | APMX / L2 |
|---|---|---|---|---|
| 102.020030850 | 2.00 | 50.00 | 3.00 | 8.00 |
| 102.020060650 | 2.00 | 50.00 | 6.00 | 6.00 |
| 102.030031240 | 3.00 | 40.00 | 3.00 | 12.00 |
| 102.030060750 | 3.00 | 50.00 | 6.00 | 7.00 |
| 102.030061250 | 3.00 | 50.00 | 6.00 | 12.00 |
| 102.040041440 | 4.00 | 40.00 | 4.00 | 14.00 |
| 102.040060950 | 4.00 | 50.00 | 6.00 | 9.00 |
| 102.040061450 | 4.00 | 50.00 | 6.00 | 14.00 |
| 102.050051650 | 5.00 | 50.00 | 5.00 | 16.00 |
| 102.050061150 | 5.00 | 50.00 | 6.00 | 11.00 |
| 102.060061350 | 6.00 | 50.00 | 6.00 | 13.00 |
| 102.060061850 | 6.00 | 50.00 | 6.00 | 18.00 |
| 102.060062560 | 6.00 | 60.00 | 6.00 | 25.00 |
| 102.060063575 | 6.00 | 75.00 | 6.00 | 35.00 |
| 102.080082063 | 8.00 | 63.00 | 8.00 | 20.00 |
| 102.080083075 | 8.00 | 75.00 | 8.00 | 30.00 |
| 102.0800840100 | 8.00 | 100.00 | 8.00 | 40.00 |
| 102.100102572 | 10.00 | 72.00 | 10.00 | 25.00 |
| 102.120123083 | 12.00 | 83.00 | 12.00 | 30.00 |
| 102.160163592 | 16.00 | 92.00 | 16.00 | 35.00 |
| 102.2002045104 | 20.00 | 104.00 | 20.00 | 45.00 |